The Rotobrush aiR+ is designed to give you the cleanest air ducts possible. It works by inserting the brush, which rotates at 450 rpm, inside the air duct. While the brush spins, it is loosening any debris stuck inside. As the brush is scrubbing the inside walls, the vacuum is sucking up the loosened debris, leaving you with clean air ducts. The rotating cable is not exposed, making it safe for all types of duct applications, including flex.
The R5000 is much more than an air duct cleaner. The R5000 has the power of an air scrubber for remediation work. Fire, water, mold—no problem, the R5000 was built to take care of it all. This unit is designed to handle all of your commercial needs.
According to the EPA, indoor air is found to be up to 70 times more polluted than outdoor air.
Five to seven times a day
The air in your home circulates through the air ducts of your HVAC heating and cooling system, carrying with it the dust and debris of everyday living.
Ducts may be infested with vermin, e.g. (rodents or insects).
A Cleaner Household
Cleaning removes accumulated dust so it won't shed into the household.
Cleaning removes airborne contaminates
Such as bacteria, fungus, mold spores, pet dander & pollen which may help to alleviate allergy & asthma symptoms.
Save Energy & Money
Removing debris and cobwebs eases airflow and increases the efficiency of the system, in extreme cases as much as 40%.
According to the EPA
A build up of only .042 inches of dirt on a heating coil can result in a decrease of efficiency of 21%. A clean air conveyance system may help to increase efficiency and therefore may help to reduce heating and cooling costs. The EPA recommends cleaning your air ducts every 3 to 5 years at a minimum for residential home. Commercial buildings require cleaning much more frequently.
Extend Equipment Life
9 out of 10 system failures are caused by dirt and dust.
One of the functions of the fan, located inside of your air handler, is to keep the heat exchanger cool. Accumulated dirt and debris can reduce the CFM (cubic feet of air per minute) as much as 50%. This is the most common cause of cracks in heat exchangers. By having your system cleaned, you may prevent pre-mature breakdown & aging of your heating and cooling system.