49800mAh Car Battery Jump Starter Portable Jump Box w/ Flashlight & Jumper Cable

49800mAh Car Battery Jump Starter Portable Jump Box w/ Flashlight & Jumper Cable

· Functional Portable Car Battery Jump Starter: This portable battery jump starter device is functional and easy to carry in your car in case of emergency. It can be used to boost your car’s battery in an emergency, be used as a power bank to charge phones, or as a flashlight in the dark.

· Powerful Jump Start: The 12-volt jump starter device is of high peak current that can easily jump-start your car battery in seconds. It can start up to 4.0 L gas / 2.0 L diesel engines of your 12V vehicles.

· 49800mAh Large Battery Capacity & 2 USB Charging Ports: The multipurpose jump starter is of a 49800mAh large battery capacity and it has 2 USB ports for charging your devices on the go.

· LCD Remaining Battery Display: LCD remaining battery display reminds you to recharge the battery in time.

· DO-Shaped Jumper Cable Socket & Easy to Use: DO-shaped cable socket allows easy connection. It is easy to connect and easy to use.

· Built-In Safety Protection Features: The device comes with built-in safety protection features, including short-circuit protection, reverse connection indication, over-discharge protection, over-current protection and over-charge protection.

· Flashlight Function & 3 Lighting Modes: It has a powerful LED flashlight and the light has 3 lighting modes, spotlight mode, strobe mode and SOS mode.

· Extra Compass Design: There is a small compass on the car battery jump starter that indicates direction that you are heading for.

Use Tips:
* How to Start a Car with the Jump Starter:
1. Make sure the jump starter is power off. Connect the red battery clamp to the positive (+) battery terminal. Connect the black battery clamp to the negative (-) battery terminal. Make sure the battery clamps make good clean contact with the battery terminals.
2. Connect the jumper cable to the jump starter. Make sure the blue plug is firmly inserted into the jump starter.
3. Slide the jump starter side ON / OFF switch to ON.
4. Start the car.
5. Once the car has started, remove the jumper cable from the battery within 30 seconds and leave the engine running.
* Switch the side switch to ON and then long press the surface button to turn on the light. Press the power button to change the lighting mode or turn off the light.
* It can start a car approximately 11 times from a full charge.

Use Warnings:
* Make sure the jumper cables are in good condition with no breaks or cuts in the insulation first. Clean the metal contacts as needed.
* Make sure the jumper cables are connected to the right places.
* Do NOT use wet hands to operate.
* Do NOT operate the device if the cable or electric plug is damage.
* Do NOT allow the two jumper cables to touch one another.
* Make sure the jump starter has over 80% power when using it to start the car.
* If you are not 100% certain what you are doing, call roadside assistance or service.
* Do NOT use it when it is charging.

Notes:
* Due to effect of light, camera and monitors, the item’s real color may be slightly different.
* Allow slight dimension difference due to manual measurement.

• Material: Plastic, Copper
• Size: 18.5*9*4cm / 7.3*3.5*1.6in
• Battery Capacity: 49800mAh
• Input: 5V / 2A
• Output Voltage: 12V
• Start Current: 800A (4S)
• Peak Current: 1600A
• USB Output: 5V / 2A

49800mAh Car Battery Jump Starter Portable Jump Box w/ Flashlight & Jumper Cable

• Condition: New
• Included Items: N/A
• Car Safety & Security Type: Jumper Packs
• Dimensions: 1.6 inches (H) x 3.5 inches (W) x 7.3 inches (L)
• Weight: 20.0 ounces

• Included in the box: 1 X Car Battery Jump Starter 1 X Jumper Cable 1 X Charging Cord 1 X Manual (Others are NOT included)
• Made in United States of America