- Color: Multi-color
- Electrical Type: Multi-meters & Electrical Testers
New 12V&6V 1.5 Amp Battery Charger For Harley Davidson Motorcycles Maintainer
Brief: This device is 4 stages smart battery charger by
Microprocessor controlled with switch mode for 6V and 12V is selectable output .it is ideal for charging your CAR,MOTORCYCLE AND RIDE-ON TOY batteries,suit for type of batteries included AGM GEL VRLA SLA WET and deep-cycle.
4-stage charging process:
initialization,when the charger power on then it start self-check and detect the battery correct connect. low output voltage without battery Fault LED is light, please CHECK THE POLARITY IS CORRECT.
Bulk charge,using the charger highest rated current for the type of battery in use until it reaches 80% capacity( LEDs 50% blinking ,100% OFF)
Absorption,the output voltage is limited to 7.3V(6V battery) or 14.5V(12V battery) while current declines as the battery charges to its full capacity without overheating( LEDs 50% ON ,100% blinking)
Float,At this stage,the battery is fully charged and the charger maintains the battery through pulse charging( LEDs 50% ON ,100% ON)
Before charging,make sure the correct battery voltage with the device voltage as same.
Input: 100-240VAC@50/60Hz 0.5rms
Output: DC 6.9V@ 1.5Amp
Limited voltage: 7.2~7.3V or 14.5~14.7V
Float current: 300mA~400mA
Charging mode: Fully automatic
Suitable battery: 6V or 12V AGM GEL VRLA SLA WET
Charging Battery : 6-12Ah
Maintaining Battery: 4-36Ah
Charger Size: 85X53X39mm
Safety: EN60950-1 EN60335
Approved: CE RoHS
Battery Charger x1
DC Output Cable with Clamp Connectors x1
DC Output Cable with Ring Connectors x1
User Manual x1
New 12V&6V 1.5 Amp Battery Charger For Harley Davidson Motorcycles Maintainer Multi-meters & Electrical Testers Multi-color
- Dimensions: 1.0 inches (H) x 1.0 inches (W) x 1.0 inches (L)
- Weight: 1.0 ounces
- Made in China
The Fine Print
Offer is not eligible for our promo codes or other discounts.