Oral Digital Thermometer for Adults and Baby with LED Backlight

Instructions:

1. Before use, disinfect the thermometer sensor head with alcohol.

2. Press the power button, the buzzer will make a beep sound and display a prompt symbol.

3. Subsequently, the display shows the last measured temperature for 2 minutes, then the ° C symbol on the display flashes, indicating that it is in the state to be measured.

4. Put the sensor head of the thermometer into the measurement part, and the display shows that the temperature gradually rises. At the same time, the ° C symbol flashes, indicating that the measurement is in progress. If the temperature is unchanged for 16 consecutive minutes during measurement, the ° C symbol stops flashing, indicating that the water temperature measurement is complete and the measurement result has been memorized, and the displayed temperature value can be read.

5. After the measurement is completed, if you do not press the power button to turn off the power, it will automatically shut down after 8 minutes.

6.need 1.5v Button battery(Product does not contain battery）

Oral Digital Thermometer for Adults and Baby with LED Backlight 15*2.5cm

• Dimensions: 1.0 inches (H) x 1.0 inches (W) x 1.0 inches (L)
• Weight: 1.0 ounces

• Made in United States