- Single LED 1.5W with 6 LED inside,total 9W super brightness.
- Bronze housing materials, 100% anti-corrosion Standard “1/2 NPT thread type, connected with 2 meters cable.
- Note: be careful with the outlet holes and please do not push the wire inside too hard and do not twist too tightly.
- Features: 1.New Thermal conductive package & credd led 2.Bronze material & chrome-plating housing 3.waterproof joint, easy to set up &remove 4.IP68 waterproof, vibration proof; great lighting & energy saving
- Note: 1. Standard ½"NPT joint can be easily intalled by your hands 2. Please use the light under the water and the test output must be DC12-24V. If not, the light will shut off in a few minute as it is overheated design 3. Please don't use any tools (like pliers and knife) to intalls the light as it may destroy the protecitve layer 4. Please don’t press the outgoing bulke or shake the wire hardly, or it will damage the driver
- Installation instruction:
1.Loosen the drain light
2.Run the cable leads thru the garboard drain opening and screw the drain plug light assembly into the existing garboard fitting .The garboard fitting is 1/2 NPT
3.Connecting the light wire to a 12-24V on/off switch. Plug in the waterproof connector
4.Attach the red lead the positive(+) with the included in line 3 AMP assembly fuse and the black lead to the negative (-)
5.Switch on the light to check if it works well
The Fine Print
Offer is not eligible for our promo codes or other discounts.