removes 8mm and 10mm glow plugs.
Set includes all required adaptors for drilling; centring and pulling for the safe removal of glow plug
With a storage case.
The t-profile nut is placed on the center electrode .
The electrode detached with a pistol . Right around! Remove the center electrode. If The central electrode has not cut down on the breaking point ; Then unscrew and focuses electrode with part ( sleeve ) by unscrewing.
Sleeve is placed on the middle electrode; Fixed and unscrew the drill included.
Fit the handle drill ; drill right . This drill sleeve coat slightly and apply a thick layer of grease ( fat )
Caution : Low speed is pierce and remove impurities several times during the drilling process . The pierce to the end.
Threading drill cut A ¼ inch thread length in layer 2 cm plug . Particularly important is that you subsequently remove impurities .
Threaded adapter piece revolves extraction and screw in the spark plug thread ¼ -inch plug.
Sleeve dessurubare arises as contra - support and dessurubeaza debris plugs with compression nut
Then plug reta thread.
You apply a thick layer of grease on the drill bit screwed ; so dirt does not fall into the combustion chamber of the engine.
This set includes:
ratchet-bar;drill holding adaptor;puller outer housing;
force screw;force nut;top connection removal tool star socket;
allen key;dual-size high-tensile step drill m8 & m10;
pilot drill centring sleeves;pilot drills 3.5mm;
The Fine Print
Offer is not eligible for our promo codes or other discounts.